Node Error "The node has no valid cluster probe address and you can't add any resources until this is resolved."
search cancel

Node Error "The node has no valid cluster probe address and you can't add any resources until this is resolved."

book

Article ID: 4095

calendar_today

Updated On:

Products

DX Unified Infrastructure Management (Nimsoft / UIM)

Issue/Introduction

Popup error message is displayed when selecting Profiles node on the left side navigation window of the cluster probe.

Node Error
"The node has no valid cluster probe address and you can't add any resources until this is resolved."

Cause

Probe is unable to resolve the cluster node name

Resolution

1. In IM, select the robot with the cluster probe

2. Select the cluster probe and open the probe in Raw Configure mode

3. Select the setup section and add a new key named 'node' and enter the cluster node hostname as the value.

4. Click OK and restart the cluster probe

5. Repeat steps 1 through 4 for the second robot with the cluster probe. Make sure to enter it's own cluster node name.

Additional Information

See cluster Troubleshooting

https://techdocs.broadcom.com/us/en/ca-enterprise-software/it-operations-management/ca-unified-infrastructure-management-probes/GA/alphabetical-probe-articles/cluster-clustered-environment-monitoring/cluster-troubleshooting.html 

Powered by Wolken Software